Everything we know about GEEEK’s G1 SE SFF PC case

GEEEK G1 SE SFF PC case

SFF case maker GEEEK has once again shown off its upcoming G1 SE PC case on Twitter, showing us the bottom of it this time. This new image gives us even more information on the unreleased case, and from the looks of things, it appears to be a fairly big upgrade over the original G1.

Taking a look at the image, the first thing that sticks out is the bottom panel we mentioned in a previous post. The bottom of the case has been removed to cut costs, leaving a black bracket instead. The bracket looks to spread the bottom fans further from each other and give them a nice fan grill. This means the case will likely not support water-cooling either.

The power button looks to match the metal’s finish, rather than being a shiny finish on the G1, a much more finished look, in my opinion. The SSD mounting bracket looks to have a new metal construction that matches the holes in the side panels and top of the case. We can also see that the power supply mount has been changed, possibly to make it easier to get in and out.

Previous images

Taking a look at this image, we now know for sure that bottom fan intakes have been updated with a grill design, a much-welcomed change. On top of this, we can now see the case has a new inner shell covering the silver metal on the inside and forms the bottom of the case.

Overall, it seems that GEEEK is essentially creating a V2 of the current G1, with cosmetic improvements that manage to keep the cost down at the same time. The case looks pretty good from the looks of things, and we can’t wait to get our hands on it.

Taking a look at the previous image posted to Twitter by GEEEK, we can see a few notable differences from the original G1. The first thing we noticed is the black metal ring surrounding the inside of the case. This new black ring covers the silver finish on the inside, giving the case a more finished look.

Next on the list of changes in the bottom fan grill. The original G1 lacks a mesh-like pattern in favor of large cutouts, allowing more air and dust into the case from the bottom. In the new image of the G1 SE, it appears that the large holes have been switched out for the same circular mesh.

Looking at the fan intake on the top of the case, it appears that it has been made a little longer, possibly to accommodate three 92 mm fans along with the standard 120 mm fans. This should also improve the thermals of the case, as it has plagued the current G1.

Something that took me a little longer to notice is excluding the metal case on the bottom of the case. Since the outer casing is likely the most costly part to make, it makes sense that the bottom of the case would be cut down to use less material and save a little money at the same time. I assume that the side panels will cover this so that it won’t be an issue.

Check out the rest of our coverage on GEEEK’s SFF PC cases:

Get the latest in your inbox

A daily email keeping you informed on the latest news

By Josh Spires

Josh has been a senior editor for the last few years, focusing on drones and related technologies. During this time, he grew interested in small form factor PCs and decided to launch SFF GEEK – a website focused on the topic.